HA17800V/VP/VPJ Series 3-terminal Fixed Voltage Regulators Description HA17800V series is positive output 1 A three-terminal regulator IC. Which features are as follows. It is designed to suit to the power supply of various equipments and to stabilize the multi switching regulator voltage, and to supply power to some kind of control devices. Features * High ripple rejection ratio up to high frequency (f 20 kHz): 60 dB(in the case of HA17805V/VP/VPJ) * Protected against oscillation * Regulated output voltage against temperature (0 Ta 125C, 80 ppm/C typ) * Hard to breakdown against irrelevant connection * Built-in circuits as over current control circuit, temperature protection circuit, and area of safety operation control circuit Ordering Information Output Voltage (V) Automotive Use Industrial Use Commercial Use Package 5 HA17805VPJ HA17805VP HA17805V TO - 220AB 6 HA17806VPJ HA17806VP HA17806V 7 HA17807VPJ HA17807VP HA17807V 8 HA17808VPJ HA17808VP HA17808V 12 HA17812VPJ HA17812VP HA17812V 15 HA17815VPJ HA17815VP HA17815V 18 HA17818VPJ HA17818VP HA17818V 24 HA17824VPJ HA17824VP HA17824V HA17800V/VP/VPJ Series Pin Arrangement 4 Mark 1. Input 2. Common 3. Output 4. Common 1 2 3 (Top View) Block Diagram ASO Control INPUT Reference Voltage Starting Circuit OUTPUT Temperature Protection + - Over Current Control Error Amp COMMON Standerd Circuit Input Cin 0.33 F 2 HA178xxV Output Cout 0.1 F HA17800V/VP/VPJ Series Absolute Maximum Ratings (Ta = 25C) Ratings Item Symbol HA17800V/VP HA17800VPJ Unit Notes Input voltage VIN 35 35 V 1 Power dissipation PT 15 15 W 2 Operating ambient temperature Topr -20 to +75 -40 to +85 C Storage temperature Tstg -55 to +125 -50 to +125 C Operating junction temperature Tj -20 to +125 -40 to +125 C Max Power Dissipation PTmax (W) Notes: 1. HA17824V/VP/VPJ, 40 V 2. Follow derating curve 15 (1) HA17800V/VP HA17800VPJ 10 5 (2) (1) With infinitely large heat sink additional (2) 5C/W heat sink ) Include thermal resistance (3) 15C/W heat sink (4) Without heat sink Thermal resistance j-c = 5.0C/W (max) j-a = 83C/W (max) (3) (4) 0 20 60 75 100 Ambient Temperature Ta (C) 3 HA17800V/VP/VPJ Series HA17805V/VP/VPJ Electrical Characteristics (VIN = 10 V, IOUT = 500 mA, 0C Tj 125C, CIN = 0.33 F, COUT = 0.1 F) Item Symbol Min Typ Max Unit Test Conditions Output voltage VOUT1 4.8 5.0 5.2 V Tj = 25C VOUT2 4.75 5.25 V 7 V V IN 20 V, 5 mA IOUT 1.0 A, P T 15 W VOLine1 30 100 mV Tj = 25C, 7 V V IN 25 V VOLine2 10 50 mV Tj = 25C, 8 V V IN 12 V VOLoad1 30 100 mV Tj = 25C, 5 mA I OUT 1.5 A VOLoad2 10 50 mV Tj = 25C, 250 mA I OUT 750 mA Quiescent current IQ 0.8 3.5 7.0 mA Tj = 25C, I OUT = 0 Quiescent current change IQ1 1.3 mA 7 V V IN 25 V IQ2 0.5 mA 5 mA I OUT 1.0 A Voltage drop Vdrop 2.0 2.5 V Tj = 25C, I OUT = 1.0 A Ripple rejection ratio RREJ 60 dB Tj = 25C, f = 10 kHz Temperature coefficient of output voltage VOUT/Ta -0.5 mV/C I OUT = 5 mA Output noise voltage Vn 120 Vrms Tj = 25C, 10 Hz f 100 kHz Output short circuit current I OS 1.25 A Tj = 25C Peak output current Iop 2.2 A Tj = 25C Line regulation Load regulation 4 HA17800V/VP/VPJ Series HA17806V/VP/VPJ Electrical Characteristics (VIN = 11 V, IOUT = 500 mA, 0C Tj 125C, CIN = 0.33 F, COUT = 0.1 F) Item Symbol Min Typ Max Unit Test Conditions Output voltage VOUT1 5.75 6.00 6.25 V Tj = 25C VOUT2 5.7 -- 6.3 V 8 V VIN 21 V, 5 mA IOUT 1.0 A, PT 15 W VOLine1 -- 36 120 mV Tj = 25C, 8 V VIN 25 V VOLine2 -- 12 60 mV Tj = 25C, 9 V VIN 13 V VOLoad1 -- 36 120 mV Tj = 25C, 5 mA IOUT 1.5 A VOLoad2 -- 12 60 mV Tj = 25C, 250 mA IOUT 750 mA Quiescent current IQ 0.8 3.5 7.0 mA Tj = 25C, IOUT = 0 Quiescent current change IQ1 -- -- 1.3 mA 8 V VIN 25 V IQ2 -- -- 0.5 mA 5 mA IOUT 1.0 A Voltage drop Vdrop -- 2.0 2.5 V Tj = 25C, IOUT = 1.0 A Ripple rejection ratio RREJ -- 60 -- dB Tj = 25C, f = 10 kHz Temperature coefficient of output voltage VOUT/Ta -- -0.5 -- mV/C I OUT = 5 mA Output noise voltage Vn -- 120 -- Vrms Tj = 25C, 10 Hz f 100 kHz Output short circuit current I OS -- 1.2 -- A Tj = 25C Peak output current Iop -- 2.2 -- A Tj = 25C Line regulation Load regulation 5 HA17800V/VP/VPJ Series HA17807V/VP/VPJ Electrical Characteristics (VIN = 12.5 V, IOUT = 500 mA, 0C Tj 125C, CIN = 0.33 F, COUT = 0.1 F) Item Symbol Min Typ Max Unit Test Conditions Output voltage VOUT1 6.72 7.00 7.28 V Tj = 25C VOUT2 6.65 7.35 V 9 V V IN 22 V, 5 mA IOUT 1.0 A, P T 15 W VOLine1 45 140 mV Tj = 25C, 9 V V IN 25 V VOLine2 15 70 mV Tj = 25C, 10 V V IN 15 V VOLoad1 45 140 mV Tj = 25C, 5 mA IOUT 1.5 A VOLoad2 15 70 mV Tj = 25C, 250 mA IOUT 750 mA Quiescent current IQ 0.8 3.5 7.0 mA Tj = 25C, IOUT = 0 Quiescent current change IQ1 1.3 mA 9 V V IN 25 V IQ2 0.5 mA 5 mA IOUT 1.0 A Voltage drop Vdrop 2.0 2.5 V Tj = 25C, IOUT = 1.0 A Ripple rejection ratio RREJ 58 dB Tj = 25C, f = 10 kHz Temperature coefficient of output voltage VOUT/Ta -0.6 mV/C I OUT = 5 mA Output noise voltage Vn 140 Vrms Tj = 25C, 10 Hz f 100 kHz Output short circuit current I OS 1.1 A Tj = 25C Peak output current Iop 2.2 A Tj = 25C Line regulation Load regulation 6 HA17800V/VP/VPJ Series HA17808V/VP/VPJ Electrical Characteristics (VIN = 14 V, IOUT = 500 mA, 0C Tj 125C, CIN = 0.33 F, COUT = 0.1 F) Item Symbol Min Typ Max Unit Test Conditions Output voltage VOUT1 7.70 8.00 8.30 V Tj = 25C VOUT2 7.6 8.4 V 10.5 V V IN 23 V, 5 mA IOUT 1.0 A, P T 15 W VOLine1 58 160 mV Tj = 25C, 10.5 V V IN 25 V VOLine2 20 80 mV Tj = 25C, 11 V V IN 17 V VOLoad1 58 160 mV Tj = 25C, 5 mA IOUT 1.5 A VOLoad2 20 80 mV Tj = 25C, 250 mA IOUT 750 mA Quiescent current IQ 0.8 3.5 7.0 mA Tj = 25C, IOUT = 0 Quiescent current change IQ1 1.0 mA 10.5 V V IN 25 V IQ2 0.5 mA 5 mA IOUT 1.0 A Voltage drop Vdrop 2.0 2.5 V Tj = 25C, IOUT = 1.0 A Ripple rejection ratio RREJ 58 dB Tj = 25C, f = 10 kHz Temperature coefficient of output voltage VOUT/Ta -0.6 mV/C I OUT = 5 mA Output noise voltage Vn 150 Vrms Tj = 25C, 10 Hz f 100 kHz Output short circuit current I OS 1.0 A Tj = 25C Peak output current Iop 2.2 A Tj = 25C Line regulation Load regulation 7 HA17800V/VP/VPJ Series HA17812V/VP/VPJ Electrical Characteristics (VIN = 19 V, IOUT = 500 mA, 0C Tj 125C, CIN = 0.33 F, COUT = 0.1 F) Item Symbol Min Typ Max Unit Test Conditions Output voltage VOUT1 11.5 12.0 12.5 V Tj = 25C VOUT2 11.4 12.6 V 14.5 V V IN 27 V, 5 mA IOUT 1.0 A, PT 15 W VOLine1 100 240 mV Tj = 25C, 14.5 V V IN 30 V VOLine2 33 120 mV Tj = 25C, 16 V V IN 22 V VOLoad1 100 240 mV Tj = 25C, 5 mA IOUT 1.5 A VOLoad2 33 120 mV Tj = 25C, 250 mA IOUT 750 mA Quiescent current IQ 0.8 3.6 7.2 mA Tj = 25C, IOUT = 0 Quiescent current IQ1 1.0 mA 14.5 V V IN 30 V change IQ2 0.5 mA 5 mA IOUT 1.0 A Voltage drop Vdrop 2.0 2.5 V Tj = 25C, IOUT = 1.0 A Ripple rejection ratio RREJ 58 dB Tj = 25C, f = 10 kHz Temperature coefficient of output voltage VOUT/Ta -0.8 mV/C I OUT = 5 mA Output noise voltage Vn 290 Vrms Tj = 25C, 10 Hz f 100 kHz Output short circuit current I OS 0.6 A Tj = 25C Peak output current Iop 2.1 A Tj = 25C Line regulation Load regulation 8 HA17800V/VP/VPJ Series HA17815V/VP/VPJ Electrical Characteristics (VIN = 23 V, IOUT = 500 mA, 0C Tj 125C, CIN = 0.33 F, COUT = 0.1 F) Item Symbol Min Typ Max Unit Test Conditions Output voltage VOUT1 14.4 15.0 15.6 V Tj = 25C VOUT2 14.25 15.75 V 17.5 V V IN 30 V, 5 mA IOUT 1.0 A, P T 15 W VOLine1 144 300 mV Tj = 25C, 17.5 V V IN 30 V VOLine2 48 150 mV Tj = 25C, 20 V V IN 26 V VOLoad1 144 300 mV Tj = 25C, 5 mA IOUT 1.5 A VOLoad2 48 150 mV Tj = 25C, 250 mA IOUT 750 mA Quiescent current IQ 0.8 3.6 7.2 mA Tj = 25C, IOUT = 0 Quiescent current IQ1 1.0 mA 17.5 V V IN 30 V change IQ2 0.5 mA 5 mA IOUT 1.0 A Voltage drop Vdrop 2.0 2.5 V Tj = 25C, IOUT = 1.0 A Ripple rejection ratio RREJ 58 dB Tj = 25C, f = 10 kHz Temperature coefficient of output voltage VOUT/Ta -0.8 mV/C I OUT = 5 mA Output noise voltage Vn 300 Vrms Tj = 25C, 10 Hz f 100 kHz Output short circuit current I OS 0.4 A Tj = 25C Peak output current Iop 2.1 A Tj = 25C Line regulation Load regulation 9 HA17800V/VP/VPJ Series HA17818V/VP/VPJ Electrical Characteristics (VIN = 27 V, IOUT = 500 mA, 0C Tj 125C, CIN = 0.33 F, COUT = 0.1 F) Item Symbol Min Typ Max Unit Test Conditions Output voltage VOUT1 17.3 18.0 18.7 V Tj = 25C VOUT2 17.1 18.9 V 21 V V IN 33 V, 5 mA IOUT 1.0 A, P T 15 W VOLine1 195 360 mV Tj = 25C, 21 V V IN 33 V VOLine2 65 180 mV Tj = 25C, 24 V V IN 30 V VOLoad1 195 360 mV Tj = 25C, 5 mA IOUT 1.5 A dVOLoad2 65 180 mV Tj = 25C, 250 mA IOUT 750 mA Quiescent current IQ 0.8 3.6 7.2 mA Tj = 25C, IOUT = 0 Quiescent current change IQ1 1.0 mA 21 V V IN 33 V IQ2 0.5 mA 5 mA IOUT 1.0 A Voltage drop Vdrop 2.0 2.5 V Tj = 25C, IOUT = 1.0 A Ripple rejection ratio RREJ 56 dB Tj = 25C, f = 10 kHz Temperature coefficient of output voltage VOUT/Ta -0.8 mV/C I OUT = 5 mA Output noise voltage Vn 430 Vrms Tj = 25C, 10 Hz f 100 kHz Output short circuit current I OS 0.35 A Tj = 25C Peak output current Iop 2.1 A Tj = 25C Line regulation Load regulation 10 HA17800V/VP/VPJ Series HA17824V/VP/VPJ Electrical Characteristics (VIN = 33 V, IOUT = 500 mA, 0C Tj 125C, CIN = 0.33 F, COUT = 0.1 F) Item Symbol Min Typ Max Unit Test Conditions Output voltage VOUT1 23.0 24.0 25.0 V Tj = 25C VOUT2 22.8 25.2 V 27 V V IN 38 V, 5 mA IOUT 1.0 A, P T 15 W VOLine1 260 480 mV Tj = 25C, 27 V V IN 38 V VOLine2 86 240 mV Tj = 25C, 30 V V IN 36 V VOLoad1 260 480 mV Tj = 25C, 5 mA IOUT 1.5 A VOLoad2 86 240 mV Tj = 25C, 250 mA IOUT 750 mA Quiescent current IQ 0.8 3.7 7.4 mA Tj = 25C, IOUT = 0 Quiescent current change IQ1 1.0 mA 27 V V IN 38 V IQ2 0.5 mA 5 mA IOUT 1.0 A Voltage drop Vdrop 2.0 2.5 V Tj = 25C, IOUT = 1.0 A Ripple rejection ratio RREJ 50 dB Tj = 25C, f = 10 kHz Temperature coefficient of output voltage VOUT/Ta -1.2 mV/C I OUT = 5 mA Output noise voltage Vn 570 Vrms Tj = 25C, 10 Hz f 100 kHz Output short circuit current I OS 0.25 A Tj = 25C Peak output current Iop 2.0 A Tj = 25 C Line regulation Load regulation 11 HA17800V/VP/VPJ Series Characteristic Curves Output Voltage vs. Junction Temperature (1) Ripple Rejection Ratio vs. Frequency 80 HA17805V VIN = 10 V IOUT = 5 mA 60 5.0 4.8 0 HA17805V,15V,24V VIN = 10 V/23 V/33 V IOUT = 500 mA,Tj = 25C Ripple Rejection Ratio RREJ (dB) Output Voltage VOUT (V) 5.2 25 50 75 100 Junction Temperature Tj (C) 40 100 125 Output Voltage vs. Output Current 3 Peek Output Current Iop (A) Output Voltage VOUT (V) HA17805V/15V/24V VIN = 10 V/23 V/33 V Tj = 25C 12 100 k Peak Output Current vs. Voltage Drop 30 20 10 0 0 1k 10 k Frequency f (Hz) 1 2 Output Current IOUT (A) 3 HA17805V Tj = 25C 2 1 0 0 10 20 Voltage Drop VDROP (V) 30 HA17800V/VP/VPJ Series Output Voltage vs. Input Voltage (1) Output Voltage vs. Input Voltage (2) 10 25 IOUT = 500 mA Tj = 25C Output Voltage VOUT (V) Output Voltage VOUT (V) HA17805V Tj = 25C 5 IOUT = 1.5 A 1.0 A 0.5 A HA17824V 20 15 HA17815V 10 5 HA17805V 0 0 10 20 30 Input Voltage VIN (V) 0 0 40 15.6 HA 17815V VIN = 23 V IOUT = 5 mA HA17805V IOUT = 0 mA Tj = 25C Output Voltage VOUT (V) Quiesent Current IQ (mA) 40 Output Voltage vs. Junction Temperature (2) Quiescent Current vs. Input Voltage 6 3 0 0 10 20 30 Input Voltage VIN (V) 10 20 30 Input Voltage VIN (V) 40 15.0 14.4 0 25 50 75 100 Junction Temperature Tj (C) 125 13 HA17800V/VP/VPJ Series Output Voltage vs. Input Voltage (3) 10 Output Voltage VOUT (V) Output Voltage VOUT (V) Output Voltage vs. Junction Temperature (3) 25.0 HA17824V VIN = 33 V IOUT = 5 mA 24.0 ,,, 23.0 0 25 50 75 100 Junction Temperature Tj (C) 125 HA17805V IOUT = 500 mA Tj = 25C 5 0 0 10 20 Input Voltage VIN (V) Oscillation Area 30 35 Measurement Circuit Road Capacitance COUT (F) 80 Non Osc Area 1 Osc Area 1000 p 1p 0 14 1p 1000 p Input Capacitance CIN (F) 1 6.8 H 30 cm CIN VIN Test condition COUT 30 cm RL VIN = 10 V 0 < IOUT < 1.4 A HA17800V/VP/VPJ Series Package Dimensions Unit: mm 11.5 MAX 2.79 0.2 10.16 0.2 9.5 3.6 -0.08 +0.1 1.26 0.15 15.0 0.3 6.4 18.5 0.5 1.27 +0.2 -0.1 8.0 4.44 0.2 7.8 0.5 1.5 MAX 0.76 0.1 2.54 0.5 2.54 0.5 14.0 0.5 2.7 MAX 0.5 0.1 Hitachi Code JEDEC EIAJ Mass (reference value) TO-220AB Conforms Conforms 1.8 g 15 HA17800V/VP/VPJ Series Cautions 1. Hitachi neither warrants nor grants licenses of any rights of Hitachi's or any third party's patent, copyright, trademark, or other intellectual property rights for information contained in this document. Hitachi bears no responsibility for problems that may arise with third party's rights, including intellectual property rights, in connection with use of the information contained in this document. 2. Products and product specifications may be subject to change without notice. Confirm that you have received the latest product standards or specifications before final design, purchase or use. 3. Hitachi makes every attempt to ensure that its products are of high quality and reliability. However, contact Hitachi's sales office before using the product in an application that demands especially high quality and reliability or where its failure or malfunction may directly threaten human life or cause risk of bodily injury, such as aerospace, aeronautics, nuclear power, combustion control, transportation, traffic, safety equipment or medical equipment for life support. 4. Design your application so that the product is used within the ranges guaranteed by Hitachi particularly for maximum rating, operating supply voltage range, heat radiation characteristics, installation conditions and other characteristics. Hitachi bears no responsibility for failure or damage when used beyond the guaranteed ranges. Even within the guaranteed ranges, consider normally foreseeable failure rates or failure modes in semiconductor devices and employ systemic measures such as failsafes, so that the equipment incorporating Hitachi product does not cause bodily injury, fire or other consequential damage due to operation of the Hitachi product. 5. This product is not designed to be radiation resistant. 6. No one is permitted to reproduce or duplicate, in any form, the whole or part of this document without written approval from Hitachi. 7. Contact Hitachi's sales office for any questions regarding this document or Hitachi semiconductor products. Hitachi, Ltd. Semiconductor & Integrated Circuits. Nippon Bldg., 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, Japan Tel: Tokyo (03) 3270-2111 Fax: (03) 3270-5109 URL NorthAmerica : http:semiconductor.hitachi.com/ Europe : http://www.hitachi-eu.com/hel/ecg Asia (Singapore) : http://www.has.hitachi.com.sg/grp3/sicd/index.htm Asia (Taiwan) : http://www.hitachi.com.tw/E/Product/SICD_Frame.htm Asia (HongKong) : http://www.hitachi.com.hk/eng/bo/grp3/index.htm Japan : http://www.hitachi.co.jp/Sicd/indx.htm For further information write to: Hitachi Semiconductor (America) Inc. 179 East Tasman Drive, San Jose,CA 95134 Tel: <1> (408) 433-1990 Fax: <1>(408) 433-0223 Hitachi Europe GmbH Electronic components Group Dornacher Strae 3 D-85622 Feldkirchen, Munich Germany Tel: <49> (89) 9 9180-0 Fax: <49> (89) 9 29 30 00 Hitachi Europe Ltd. Electronic Components Group. Whitebrook Park Lower Cookham Road Maidenhead Berkshire SL6 8YA, United Kingdom Tel: <44> (1628) 585000 Fax: <44> (1628) 778322 Hitachi Asia Pte. Ltd. 16 Collyer Quay #20-00 Hitachi Tower Singapore 049318 Tel: 535-2100 Fax: 535-1533 Hitachi Asia Ltd. Taipei Branch Office 3F, Hung Kuo Building. No.167, Tun-Hwa North Road, Taipei (105) Tel: <886> (2) 2718-3666 Fax: <886> (2) 2718-8180 Hitachi Asia (Hong Kong) Ltd. Group III (Electronic Components) 7/F., North Tower, World Finance Centre, Harbour City, Canton Road, Tsim Sha Tsui, Kowloon, Hong Kong Tel: <852> (2) 735 9218 Fax: <852> (2) 730 0281 Telex: 40815 HITEC HX Copyright ' Hitachi, Ltd., 1998. All rights reserved. Printed in Japan. 16